ATTO Hard Drive Benchmark - Link
You have to register to download so I have attached it to the post.
Printable View
ATTO Hard Drive Benchmark - Link
You have to register to download so I have attached it to the post.
My 2x 1TB Western Digital Black SATA2, RAID 0 ICH10R (Asus P5Q Deluxe P45).
2 x Vertex 3 120GB's RAID0 on P67 Platform
http://www3.picturepush.com/photo/a/...ks/Capture.png
Utter waste of money though haha. Could have got another W/C GTX580 for the same price.
this is from rig 3 so ..
2x 640GB Western Digital on an Adaptec 1430 PCI-Express RAID Controller Card in RAID 0
(6.1 in WEI)
This is Marks Crucial C300 256GB, running in SATA 2, IDE
and the Crucial C300 in AHCI SATA2
Can't see that well on the phone how do my scores compare to others? Is the reason two drives in raid and sata 3 maybe?
Only a pleb would leave the it in IDE mode....... :D
What would be the difffernce if a Sata 3 card was installed?
LOL,
You would have the full 600MB/s bandwidth of SATA3.
- Read: Up to 355MB/sec
- Write: Up to 215MB/sec
are the specs of the Crucial C300, it doesn't say if that is SATA2 or 3 spec. It's already beating the write speed according to ATTO.
Marks Crucial C300 running in SATA3
Lol that's better! Amazing difference considering.
Thanks mate
Stupid question, but why has the write speed slowed down when using Sata 3? Or am i seeing things?
Just ran it on my Dell Inspiron 15R's Seagate 500GB 5400RPM drive.
Its actually not a bad drive, feels quite responsive and gets 5.8 in WEI. A friend of mine specifically asked dell for a 7200rpm drive and they gave him a Hitachi 7200rpm which only got 5.0 or something equally rubbish.
Since they bought IBMs HD business to make Hitachi drives, they have seriously gone down hill. IBM drives were always superb, fast and very quiet. Now they are slow and loud lol.
That's a pretty decent speed for a laptop.
This is Rig 1's results (i7 2600K, MIVE, 3x 640GB Western Digital RAID 0 128k stripe.
Here's rig 1 with it's new Corsair F3 240GB :D
Nice mate! Out of interest was there a particular reason why you went for the Corsair rather than the Vortex 3?
I'm looking at the new Mushkin Chronos deluxe 240GB - £369 - Maximum Read: 560MB/sec, Maximum Write: 520MB/sec, Random Write 4KB (Aligned): 90,000 IOPS, Controller: SandForce SF-2281, 3 Years Warranty. Not sure if anyone has heard anything about them? I had never heard of the company till i just bought some of their ram.
I went with the Corsair for a couple of reasons, I put a Corsair SSD in my Stepdad's laptop a while back and it has been rock solid, on the other hand a mate of mine has some OCZ's and he's had nothing but problems.
Then the read writes are within 10 -20 mb of each other which is what I wanted.
Also I like Corsair in general and see my sig, an OCZ SSD would have looked aweful in amongst all those Asus and Corsair parts hehe
I haven't heard anything about the Mushkin, but from what I have been reading OWC SSD's are getting some good reviews
This is the Western Digital Black 1 TB Sata 3 (6GB/s)
I'm running my Agility 3 in SataII mode so half performance. will get a new Sata 3 controller soon. anyone recommend one whic will allow max speed of my SSD and is bootable + cheap
http://i.imgur.com/1Atkw.jpg
Nice mate :up:
I used a Highpoint RocketRAID 620 SATA 6Gb/s controller in Marks (Page 1), I haven't seen any Adaptec SATA 3 cards yet.
I thought I would re-run ATTO on my Corsair Force 3 240GB to see if there was any difference....
I reinstalled Windows on my Q9400 rig so I thought I would run ATTO again.
Intel Q9400, Asus P5Q Deluxe, 8GB DDR2 GEIL, 2x 1TB Western Digital Black RAID 0 ICH10R.
Here's my new Corsair Force 3 120GB running on SATA2...
Here's my Corsair Force 3 120GB on a Z68 chipset SATA 3 ...
I recently upgraded the firmware in my Corsair Force 3 120GB to 1.3.3 ...
My Corsair Force 3 480GB x 2 in raid 0, firmware to 1.3.3
Attachment 799
Just benchmark my SSD in raid 0. Very happy with the results
http://i298.photobucket.com/albums/m...verly/Atto.png
Very nice mate :up:
I'll get my second 120Gb installed one of these days lol
Here's my 2x 120GB Corsair Force 3 in RAID0 64k Stripe
Long story short, I had to reinstall Windows so here's the results on that install with ..
2x Corsair Force 3 120GB RAID0 64k Stripe on a Z68 Intel Chipset.
I just re-ran ATTO on the 2x Corsair Force 3 in RAID 0.
Spec for this run
Intel i7 2600K @ 4GHz
ASUS P8Z68 DELUXE
16GB of Corsair Vengeance Low-Profile 1600MHz CL9
2x Corsair Force 3 120GB SSD in RAID0 64K Stripe
ASUS GeForce GTX 560 Ti TOP (Default Clock) WHQL 310.90
ASUS Xonar DX PCI-E
ASUS Blu-Ray Writer
Corsair HX650
Coolermaster CM 690 II Advanced USB3.0
I recently installed Windows 8 Enterprise on my main PC, same spec as last post ...
Spec for this run
Intel i7 2600K @ 4GHz
ASUS P8Z68 DELUXE
16GB of Corsair Vengeance Low-Profile 1600MHz CL9
2x Corsair Force 3 120GB SSD in RAID0 64K Stripe
ASUS GeForce GTX 560 Ti TOP (Default Clock) WHQL 314.22
ASUS Xonar DX PCI-E
ASUS Blu-Ray Writer
Corsair HX650
Coolermaster CM 690 II Advanced USB3.0
Windows 8 Enterprise