Project agent orange

[Ya Mother]

Don't need too, i just press bottom right and it opens.

[Ya Mother]

Update time again....spent a good 4 hours yesterday and 3 today and its starting to come along nicely....used a whole hour just getn the drive bay to open properly, as it was touching the top of the fan controller...then when i had sorted that out i put the res in and it was touching the bottom of that. so i had to start from scratch again and cut the lips off top and bottom and file them down....sorted it eventually.

Put the d-tek on with some mx2.....compression fittings dont fit....touching eachother, so had to use normal barbs.



Zee pump....



graphics card was also a problem....could only fit compression fittings on the bottom as they foul the pcb, and there was no way around that either.



Tubing time....i used the spare tubing i had to measure and fit just in case i made a mistake as i wasn't sure if i had enough if i cut 1 the wrong length.
Had a slight problem with the pump. it was tilted to the side and looked naff, but that's where i wanted it so i cut some bits of foam and jammed it underneath, sorted.

[Ya Mother]

res............







leak testing......



Been 2 hours now and all dry....had a bit foam in the res but all gone and just a few little bubbles left......tapped tubing to get rid of bubbles that were clinging to the sides and its looking good.. gonna leave overnight then start some cable managment tmoro.
I might leave the anti kink coils off, havent got any kinks and i like the clean look tbh....see how i feel. thanks for looking.

[{SAS}TB]

Looking good mate - very smart

I should hopefully start my "mini upgrade" on Tuesday and im also thinking of ditching my coils TBH

Keep the updates coming

[Lloyd_mcse]

Looking awesome mate - love it

[Jura55ic]

Very nice m8 10/10 for your first WC build

[Lloyd_mcse]

Was that your first - then that is absolutly superb mate

[Ya Mother]

Thanks guys.

[Ya Mother]

Update....
Still on with the cable tidying.....nightmare....theres about 20 wires just from the fan controller alone. and the temp sensors just reach some places, so they stretch across the gap between the mobo tray and the main 5.25" uprights.
You could also see the cables from the fan controller and the ide cable and molexes above the pump.
so it was improvisation time again.....(was gonna order some black acrylic but wouldnt have got it till late next week) were getting a new fridge freezer cos the bottom tray keeps icing up in our frost free fridge, so i had to take the bottom tray out the other day.



A few quick measurements and my trusty hack saw.



Cut a groove for the ide cable, Filled down the edges and sanded.





Will post pics of them fitted tmoro as the paint is still wet.

[Homer13]

kool, keep the updates coming mate, I may be a n00b at all this but I really do find it interesting.
When did you "notice" that the fridge freezer needed replacing? Not that you needed anything from it for your rig >.>

[Ya Mother]

I noticed a while back ha ha....just cant be arsed to keep removing the ice....so took out the draw.
Was hoping to fire the baby up this weekend, but ive ordered some 12" orange cathodes for the bottom and im still waiting for another set of 12" uv cathodes from chilled (they are sold out) and also a black sata cable and black thumbscrews. so wont be till next weekend now.

[Ya Mother]

Just fired the baby up......OMFG........its full of stars......4870x2 is the dogs. 27c idle on cpu....gotta go to work.

[Ya Mother]

Update time again..... got my 2 xigmatech fans to replace the coolermasters and got another set of uv lights and a 1Tb samsung hard drive.



Also got a couple of black sata cables.



I got some black metal thumbscrews aswell as i didnt think the chrome ones went with the black....also changed them inside aswell.

[Ya Mother]

Fans fitted..........



Installed the ram cooler (took fans out...just cosmetic now...looks better than seeing the ocz gold ram).



put a 3 orange lazer led light behind it.

[Ya Mother]