My Haswell Setup

[Lloyd_mcse]

Something I did find interesting (totally separate) is that on pic 1 it shows 3.50ghz but on picture 4 it shows 4.30ghz

When it was first installed, Steve and Dave were here with me and we oc it to 4.3 then set it back to default after some BSOD from something else.

CPUZ confirms:

I'm at 4.2GHz and I only have a core voltage 1.198.

EDIT: The 3.5GHz you see is the chips standard clock you can see further down on CPU-Z - Core Speed.

[Mark1978]

I'm at 4.2GHz and I only have a core voltage 1.198.

EDIT: The 3.5GHz you see if the chips standard clock you can see further down on CPU-Z - Core Speed.

I haven't really looked at overclocking yet as I don't understand the BIOS enough. There are "one touch set ups" which create Auto OC profiles but I would rather understand them properly first. Allegedly they use too much VCore too. Like I know what VCore is!!

There is a guy using the same mobo and chip here who explains things in further detail, I am off this week so will have a good read and see what I can decipher.